If you are setting up an office, whether in a commercial building or at home, you will probably need a copier machine. One of the important decisions you will be making is whether you will go for a copier lease, or purchase one for yourself?Unless you will be needing multiple copies of documents everyday, generally, the better and more economical choice is a copier lease. Here are some of the reasons why:- Maintenance and repair of your own copier machine could turn out to be costlier and more time-consuming than you think. If you have a copier lease, regular maintenance will be provided for you and if you need the machine to be fixed, all you have to do is call the vendor and they will send a repair guy to you right away. – In the same way, when a part of your copier needs to be replaced, you may have to go to several stores before you find the exact part that you need…and then you have to install it yourself. If you have a copier lease, they will be the ones to look for a high-quality but low-cost copier part. True, you will have to pay for the part, but installation services are free.In addition, some copier leases also give you the benefit of free minor parts and free installation.
Looking for assistance Office equipment in Cleveland OH? – We can help you! Located in Ohio.
Most companies will also provide you with a temporary unit while your own copier is undergoing repairs.- When the time comes when you want to change to a more advanced model, it will be very easy if you have a copier lease. Leasing companies are always willing to modify your lease and exchange your current machine with a newer model. On the other hand, if your copier machine was purchased, and you want to buy a new one, you will end up with two copier machines. Unless you have sufficient storage space, you will have the burden of looking for a buyer for your old unit, or dispose of it in some other way.In most cases, copier leases are really the more practical choice. It saves you money and is hassle-free.
Xerox has been top of the line and durable printers. From time to time, they also experience minor problems, which are pretty normal during the life span of a printer. When experiencing printer problems, do not call a service personnel immediately - check first if you can repair the problem.Here are the steps that you can take when experiencing problems.• No power. Your printer should be securely connected to a power source with the proper voltage, and the electric current meets the specifications. Furthermore, it is best if your printer does not share the power source with other devices that requires high-power.• Paper jams. Check the proper loading instructions; maybe you have loaded multiple sheets at once the paper is wrinkled. There are papers that cannot be used in Xerox printers some of these are rough papers, transparent papers, and padded envelopes. In addition, check the paper if it is specifically designed for inkjet or laser printer and no not defeat its purpose. The surface where the printer is located should be flat, otherwise it could be the reason of jamming paper. Check also the paper tray and tray guides if it is in correct position. • Unusual noise. Open your printer door and use a flashlight to have a good look at the interior. Check if there are foreign objects or small insects that might have crawled there. If there is none, check your procedure on proper loading of paper and the surface which your printer sits should be level.• Cannot print. Check if the printer is securely connected to the computer; visually inspect the physical conditions of wire/cables used. When using Wi-Fi connection, make sure the signal strength is good. Furthermore, check if there is an error message in the control panel.• Overheated printer. This is a problem usually encountered with a laser printer; make sure the air vents of the printer are not blocked. You may verify the manual to check the space requirements of the printer. Let the printer cool down for at least 30 minutes. You may open some of the covers of the printer so that the air can circulate more.• Poor print quality. Check if the toner or cartridge used is recommended by Xerox. Then check the paper that is being used, maybe it is damp and need replacement. If the printer is a little old, maybe the transfer belt is the culprit, and it also needs replacement. If all of these do not work, then the problems may be on your voltage supply. It is best that you contact Xerox support. • Some of the colors are faded. Check your toner cartridge, see if it is damaged or empty and replace it.• Water vapor condensation. Turn off the printer and unplug it. Wait for the condensed water to disappear. It is recommended that you do not use your printer for at least an hour or two.Those are the basic printer problems that you can resolve and save the money for repairs. However, don't be so stingy - if the actions above do not resolve the problems - call a technician.
Our technicians are highly experienced and up to date on the latest technology, and our system for managing service calls has been honed to perfection over 25 years. ACS sales staff has a straightforward approach to creating custom fitted solutions for each client’s needs. No high pressure sales or glossing over the details. And whenever issues arise, you can always talk directly to someone who knows you and your company.
Going with a “big box” company for your office equipment can save money in the short term, but often leads to frustration and regret down the road. What we have to offer is an alternative that has proven to be a better option for many organizations. We are a company built on lasting relationships within the community that result in long-term cost efficiency and truly first-rate service for our customers.
Areas we service in Ohio
Central Ohio – Cleveland